Peculiarities mechanisms predict and evaluate the results of actions of an intelligent agent. Building and planning procedures and correction strategy and tactics based on the behavior of a cybernetic circuit functional systems. This scheme is a concept of an intelligent agent architecture.

Keywords: Intelligent agent, adaptive behavior, the model achieve the goal, the efferent mechanism synthesis

The article describes the preparation of the sensitivity of the output voltage for a typical architecture of voltage reference to variations of the parameters of elements. Also considers the main advantages of this approach in the analysis and design of circuits. The article presents the corresponding graphs sensitivities. Based on the findings conclusions about the impact of deviations of circuit elements on the output parameters of the reference voltage was done.

Keywords: Sensitivity, CMOS voltage reference, bias voltage, group bias

The properties of the water-soluble high-modulus silicate systems: based on alkali metal polysilicates called liquid glass and chain their transformation from lower to higher oligomers, with the subsequent formation of colloidal solutions - silica sol. The methods of preparation, properties and applications of water-soluble high-modulus silicate systems. The possibilities of their use as a binder and modifying agents for various nanostructured composite materials. The examples of promising areas of application of liquid glass and high modulus of aqueous solutions of silicates in construction and industry. In particular show the possibility of using liquid glass and aqueous solutions of silicates in the production of nanostructured silicate polymer. In space engineering for manufacturing water-destructed mandrels used in the manufacture of solid rocket motor casings and pressure vessels 'cocoon' of composite materials by winding. The application of the inorganic sol to obtain a nanocomposite ceramics and monolithic blocks of silicon oxide, which can be used in various fields of modern technology. The possibility of using silica sol as a binder for refractory ultra-lightweight shielding materials used to protect equipment from high impacts. The directions of development of the production of new acid-resistant materials and linings for protection of chemical equipment, parts and components operating in corrosive environments.

Keywords: Keywords: water glass, silicate polymer concrete, additives, silicates organic bases tetrafurfuriloksisilan, furfural alcohol, nanostructure composite materials, water-soluble silicates, silica sol, sol-gel transition, cured xerogel water-destructed mandr

The paper contains a description of a new method for automatic generation of maps of goods placement. Map of goods placement created by the author's search algorithm. The algorithm is based on ideas of evolutionary search. The proposed algorithm works with a population of constant size, allows not use complex search methods and for a reasonable time find a solution close to the optimum.

Keywords: simulation, evolutionary computation, multicriteria optimization, genetic algorithms

The analytical decision on definition of a forming wall of the bunker of the greatest capacity is provided in article among all bunkers having identical entrance and exhaust outlets. Such bunkers are intended for a hydraulic type of the expiration of bulk. They reduce a pulsation loose at its exit from the outlet and reduce extent of influence of the dynamic arches by account characteristics of the bunker.

Keywords: sliding lines, entrance openings, outlets, bunker, loose body, expense of the loose.

In the article obtaining of cathodic coating MnO2 on condenser porous tantalum anode was researched. It was ascertained that formation of crystalline defects from hydrated MnO2 on MnO2 coating obtaining by known technology is possible. Such formations disturb tantalum capacitor cathode integrity. To determine the reasons of the crystal defects formation conveyed simultaneous thermal analysis of Mn(NO3)2x4H2O and Mn(NO3)2x6H2O with an analysis of the flue gases by FTIR spectroscopy. Based on the analysis results a mechanism of manganese nitrate thermolysis was suggested and the cause of the crystal defects on the surface after the coating of manganese dioxide removed from the furnace was ascertained. It was established that the thermolysis process is followed by the formation of such manganese nitrate intermediates as manganese hydroxynitrate, manganese oxyhydroxide and its further oxidation to manganese dioxide. Because of secondary processes leaking on the MnO­2 cover manganese oxyhydroxide residual can react with water vapor and oxygen, that leads to the formation of crystalline defects. Such phenomenon has a negative impact on the chemical composition and integrity of the coating on the surface of the porous MnO2 tantalum capacitor anode. Also it has been found experimentally that manganese hydroxynitrate is formed from manganese nitrate in the form of microtubules on the porous tantalum vehicle surface.

Keywords: manganese dioxide, coating, manganese nitrate, thermolysis, crystalline defects, microtubules

In article consider the development of modeling spatial spread of epidemics to improve  the quality and accuracy of anti-epidemic situation using a combination of simulation model based on stochastic model of compartmental and cellular automaton. The epidemic is spatially distributed dynamical system to describe the spatial- temporal behavior of the application of models which class of cellular automata. Cellular automata are discrete dynamical systems, which is a collection of identical cells, the same way interconnected. All cells form, the so-called lattice cellular automaton. Lattice can be of different types, differing both in dimension and shape of cells. Each cell is a finite state machine whose states are determined by the states of neighboring cells. Cells can be placed on a one-dimensional line, plane or in a multidimensional space

Keywords: Cellular automata, simulation modeling, mathematical model, epidemic diseases, model of cholera, dynamical system, Anylogic

The solid solution of  LiMn1/3Cr1/3Fe1/3O2 with the structure of α-NaFeO2  isostructural with the widely used LiCoO2  has been synthesized and investigated as a cathode material. Rated voltage of LiMn1/3Cr1/3Fe1/3O2  relative to the lithium is 4 V.  The possibility of charging − discharging the material to a specific capacity of 220-250 mAh/g at currents of C/15-C/50 without phase transformations has been experimentally demonstrated. 

Keywords: lithium-ion batteries, cathode materials, Delafosse, solid solution, X-ray structural analysis, electrochemical properties

In the article are introduced research results of physicochemical properties of ammonium nitrate – potassium nitrate water system at 25o C. The literary source analysis is performed that no clear opinion about solid phases composition. The different composition double salts, solid solution and eutectics are identifies. Appeal is specifies a look and properties of formed structures. Methods of differential thermal analysis and X-ray diffraction have been establishing that the equilibrium solid phase of the studied system represents two types of solid solutions. A first type based on the III phase of ammonium nitrate crystal latitude (at the content of nitrate of potassium to 20 %) and a second type based on the potassium nitrate rhombic syngony (at the content of nitrate of potassium more than 80 %). Crystal cells parameters of being formed phases submit to the Vegard rule. The ammonium nitrate sample (at the content of nitrate of potassium more than 12 %) keeps phase stability at the temperature range minus 50 to plus 100о С. Burst in components miscibility at the potassium nitrate concentration range 30 to 80 % is observed.

Keywords: ammonium nitrate, potassium nitrate, differential thermal analysis, X-ray diffraction, cocrystallization, solid solution

Based on the analysis of works of finnish experts shows that learning russian language with learning the finnish language as a foreign supports the development of bilingual identity and language readiness of students. 

Keywords: russian, finnish, teaching.

Currently, more than 80% of water conveyance structures worked much the normative life. At the same time there is a simultaneous increase in the load on the aging waterworks, in the absence of the necessary skilled personnel and technical repair base will inevitably lead to an increase in the number of accidents due to operational reasons. Identification of factors that influence the condition of the facilities at the intersections , the search for methods of calculation and control of non-destructive methods to evaluate their work , life extension , etc. is of paramount importance at this stage. Residual life for the safe operation of water conveyance structures determined on the basis of system analysis with the development of the block diagram of a dynamic system having a number of subsystems. The main property that determines the life of the system , is the reliability of its elements , ie reliability and trouble-free operation for a certain period of operation. Dependability and reliability of the system as a whole is determined by the condition that each element of the system can be in one of two states - serviceable or failure.

Keywords: water-conducting structures, low head hydro closed spillways, modeling, technical condition, residual life.

This article discusses the emergence Chaharbag in different places of the world and the role Chaharbag in development of landscape architecture and urban spaces of identity, as well as its influence on other arts including painting and carpet. Chahar Bagh is a special style layout, which is used in the Persian garden. Rectangular in plan shared garden paths or channels with flowing water into four smaller parts. In Persian, "Chahar" means "four" and "Bag" is translated as "garden".

Keywords: Chaharbagh, garden, Persian garden and landscape.

The combination of the unique, abnormal properties shown by oxidic systems with structure of spinel on the basis of transitional elements chromites draws attention of researchers for many years. Some systems on the basis of transitional elements chromites (for example, nickel and copper chromites) have critical elements (multicritical points, lines of phase transitions of the second sort, etc.) on the phase chart. Near these elements of the phase chart materials possess unique chemical and physical properties. Therefore development methods of receiving and research of phase forming and properties in NIO-CoO-CuO-Cr2O3 system represent fundamental and practical interest for chemistry and technology of inorganic substances. In this work processes of spinel structure formation in system 0,6 NiCr2O4 – 0,2 CoCr2O4 – 0,2 CuCr2O4 from crystal chemistry positions are considered. Formation of two solid solutions on the basis of nickel (II) chromite – with structure of cubic spinel and with tetragonal distorted structure is established. The influence of cooperative Yahn-Teller effect on processes of a spinel forming and on stabilizing impact of chloride of potassium on process of education of  two spinel solid solutions is suggested. Influence of a power factor of cation stabilization in knots of a crystal lattice as one of the important factor in reaction of spinel structure formation is considered.

Keywords: spinels, chromites of transitional elements, Jahn-Teller effect

In this paper, based on Darcy equations that govern the lubricant in porous layers , and the modified Reynolds equation in the framework of a short bearing solve the problem of unsteady motion of a viscous incompressible lubricant in the bearing clearance double-layer porous . Here we consider the case when the permeability in porous layers in the axial direction is changed by the normal law , and the combined feed lubrication is performed simultaneously in the axial and perpendicular to the bearing axis directions. As a result, the pressure field found in porous layers and in the lubricating layer and analytical dependences for the efforts of the oil film . Compiled by the equation of motion tongue and solved the problem of the stability of the unsteady motion of a pin bearing , found that in the case of a combined bearing lubrication working more steadily compared with the cases or axial directions perpendicular to the axis lubrication . The results obtained can be offered for the development of cylindrical dampers with double-layer porous collar , effectively attenuating transmitted force imbalance in the combined feed lubrication.

Keywords: two-layer porous plug; permeability porous layers, load capacity; equation of motion of the stud; stability

Maximum power pointtracking algorithms are widely used in the solar converters in order to obtain maximum power from the solar array. The article provides a brief description of the work of these algorithms, description of the method of testing based on mathematical modeling using Matlab, Simulink and SimScape packages. The results of modeling and comparative analysis  of the studied algorithms, its  strengths and weaknesses revealed.

Keywords: maximum power point, maximum power point tracker, photovoltaic, buck converter, comparative study of algorithms, perturb and observe method, constant voltage method, constant current method, icremental conductance method