To improve the quality of bearing rings, modern production strives to apply new modern methods for detecting defects based on the causes of their occurrence, as well as to introduce quality control systems by creating specialized software. An accurate assessment of the dynamic properties of bearings is very important for machines and helps to avoid serious mechanical damage. As part of the experiments, the main control methods were considered and the most effective one was established - eddy current control, which has a number of advantages compared to others. To prevent the occurrence of defective products in the control system, the fractal dimension method was considered and a neural network was built to solve the tasks of diagnosing.

Keywords: defect diagnosis, bearings, neural networks, automated control, fractal dimension, SVD filtering, Matlab software, monitoring system.

The author carried out the development of the measuring unit of the intellectual system for the protection of the territory. Based on the review of devices of a similar purpose, a block diagram of the device was developed. A functional diagram of the developed device based on the block diagram has been developed and described. The description of the computer experiment on modeling the operation of the input block of the circuit in Micro-Cap, its results and analysis is given.

Keywords: measuring unit, intelligent system, modeling, vibration, triboelectric sensor

The article examines the modern protection of the population of dual-use facilities, an analysis of it's effectiveness and further protects for the development of solving this problems. Yhe analysis was performed on the example of comparing the provision of the population with buried and other underground spaces in federal districts.

Keywords: protection of the population, infrastructure composition, types of protection, main activities, security of the population, garrison

The sedimentation analysis method is based on the measurement of the deposition rate of suspended solids depending on their equivalent diameter. The use of sedimentation for disperse systems is limited by their size, as microscopic dust particles have low deposition rates and are difficult to analyze. Therefore, for finely dispersed systems, the authors propose a method of sedimentation analysis using portable cameras that record the deposition process and break it down into frames. The images obtained frame by frame are translated with the help of a graphic editor into binary (black and white) format, which is able to process the software. The experimental data obtained are presented in the form of tables and distribution functions.

Keywords: sedimentation, dispersion, dust, binary photography, equivalent diameter, cement dust, distribution function

The effect of a zeolite support on the physicochemical properties of cobalt catalysts prepared by the precipitation method and calcined at 400°C was studied. The values of the specific surface of the catalysts, the degree of cobalt reduction, and the dispersion of the metal were determined, and the presence of functional groups on the surface of the catalysts was determined by BET, TPV, TPD-H2, and IR spectroscopy.

Keywords: catalyst, cobalt oxide, hydrocarbons, dispersion, active surface

When performing work on the inspection of residential buildings for deconservation, there are often problems associated with determining the composition of work, as well as problems related to the organization of work. This article discusses the scope of work on the survey of residential buildings for deconservation, as well as presents work in the form of schedules that allow you to predict the timing of work, as well as coordinate the exit of specialists to the facility.

Keywords: inspection of buildings, conservation of the object, organization of work, schedule of work, construction in progress, scope of work

Since the volume of restoration works of cultural heritage objects has been increasing recently, cases of problems related to the survey of these objects are not uncommon.this article discusses the main problems that arise during the survey of buildings and structures related to cultural heritage objects and suggests possible ways to solve them.

Keywords: inspection of buildings, object of cultural heritage, organization of work, non-destructive methods for determining the strength of concrete

The article deals with the issue of the influence of ambient temperature on the initial height of the flare emissions rise. The paper presents full-scale and theoretical studies of flare emissions operating near a temporary residential complex. In the course of the work, a series of images of flare emissions at different ambient temperature conditions was carried out and their subsequent comparison with the theoretical model was carried out. Field studies verify the theoretical model and establish that the initial height of the flare emissions depends on the ambient temperature and has an inverse proportionality.

Keywords: Flare, flare emissions, atmospheric air pollution, PM2.5

Engineering and geological conditions of the reconstructed territories are important town-regulating factors in the development of Master Plans and Rules of land use and development. They should be taken into account both at the pre-investment stage and at the stages of development of preliminary and working projects of construction projects. Data on the degree of exposure to dangerous engineering and geological processes will allow calculating the stress-strain state of the foundation depending on changes in the physical and mechanical properties of the soil, which means making the most effective organizational and technological decisions for the reconstruction of urban development.

Keywords: engineering and geological surveys, dense urban development, reconstructed territories, geoinformation bases, digital substructure, geological risks

The article considers the directions of development of energy, transport and water facilities through the use of liquefied natural gas.

Keywords: liquefied natural gas, energy, methane, motor transport

To ensure the correct and continuous operation of all electronic devices, it is necessary that all components of these devices correspond to their declared characteristics. In this article, an information-measuring system for incoming control and analysis of the quality of components is being developed. Structural and functional diagrams of the system were developed. A natural experiment was carried out.

Keywords: information-measuring system, input control, quality analysis, components

The electrophysical and mechanical properties of a piezoceramic material based on CTS are investigated. A number of features in the behavior of the electrophysical properties of the material in the temperature range located significantly below the low-frequency (1 kHz) maximum of the dielectric constant T_m = 160℃ have been revealed. The obtained results indicate the proximity of the studied material to ferroelectric relaxors, in particular, the low coercive field E_c~5 kVcmcm, the significant dependence of T_m on the frequency and amplitude of the measuring field, as well as the behavior of the velocity of longitudinal ultrasonic waves in this ceramic. It is shown that the elastic properties of this material are very close to ferroelectric relaxors, having a high malleability in a very wide temperature range. At the same time, the squareness of the polarization loops at relatively low temperatures indicates the manifestation of the classical properties of the ferroelectric during the polarization switching processes, and not the "freezing" processes characteristic of ferroelectric relaxors. From the results obtained, it can be established that this composition will be promising for use in the actuators of adaptive optics systems and precision positioning devices due to the high values of piezomodules.

Keywords: PZT system, ferroalloy ceramics, dispersion, polarization, elastic properties, blurred phase transitions, curie temperature, depolarization temperature, ferroelectric relaxor, rhombohedral phase, tetragonal phase

The effect of a zeolite support on the physicochemical properties of cobalt catalysts was studied on a series of samples with zeolites ZSM-5, HY, and NaX. The catalysts were obtained by precipitation followed by mixing the precipitate with a zeolite support. Their properties were characterized by BET, TPR, TPD-H2, IR spectroscopy. The results of the analysis show that the type of zeolite support affects the specific surface area, reduction of deposited cobalt, and the structural properties of the active component of catalytic systems.

Keywords: precipitated catalyst, cobalt, zeolite, dispersion, specific surface area, active component, synthetic fuel, degree of reduction

The importance of ensuring reliable operation of steel vertical tanks is emphasized. Based on the analysis of a number of scientific publications and regulatory documents, the most characteristic defects are presented in tabular form by groups, the combination of which determines the choice of the method of overhaul or reconstruction of tanks. In accordance with the data given in the table, the most common methods of overhaul and reconstruction of steel vertical tanks are considered.It is noted the need to develop organizational and technological solutions based on information technology, using servers for monitoring through the GLONASS / GPS systems, which will allow, within the framework of monitoring, to detect defects and damage to structural elements in a timely manner during the operation stage and ensure their elimination in order to increase the residual life of vertical steel tanks .

Keywords: residual life, causes of defects, welds, cracks, work methods

It was necessary to develop a filter design option for implementing it on an FPGA in conditions of limited FPGA resources and processing time. Options for constructing filters and sequential optimization of the structure for implementation on an FPGA were considered. Two models were built using the Matlab environment, where the results of signal processing with filters were compared for the same parameters. Simulations have shown that the filters are unique.

Keywords: DSP, FIR filter, pipeline, FPGA