In article the safety mechanism in construction is shown. Main types of monitoring of unique buildings and constructions are opened

Keywords: risk, construction, monitoring, labor protection, safety

In article questions of planning of load-lifting works are reflected and the assessment of category of degree of risk is carried out

Keywords: risk, load-lifting mechanisms, labor protection, safety, technological cards

In recent years reconstruction of buildings and constructions became one of the main directions in the field of construction. Considering that at reconstruction capital investments it is significantly less, and payback is higher, than at new construction, the share of capital investments in reconstruction will increase.
It is necessary to apply intensive methods of repair and reconstruction of buildings and constructions as one-time costs of reconstruction and repair there are less than one-time costs of new construction in construction production. Considering a significant amount of the factors significantly influencing the organization of construction at reconstruction of buildings and constructions, previously before development of organizational and technological documentation it is necessary to prepare the list of the data necessary for the organization of construction works and to make their analysis which concerns the analysis of projects and the territory of a building site, including situational plans.

Keywords: reconstruction, specifics of the organization, factors, systematization, analysis, feasibility study

The possibilities extend the functionality of Project Server through event handlers. Features handlers and their use

Keywords: project management, event handler, Project Server, administration, project schedule

The problems of mm propagation: rain attenuation,  depolarization and gaseous absorption are considered, and the estimate of the energy potential of wireless mobile data transport networks is given. The dependence on the output power of the distance and the total losses, and the necessary signal levels for different types of modulation being shown.  The estimate of the interfering transmitters effect of side lobes of the antenna is given.  

Keywords: radio wave propagation, mm range, energy potential, rain clutter, side lobes, polar pattern

There has been carried out the comparative analysis of the training algorithms of artificial neural networks of perceptron type: genetic, adaptive and hybrid.The comparison revealed that the adaptive algorithm is better coped with the task than the other algorithms. It is better to use the hybrid algorithm to solve the problem with complex target multiextremal function for which the adaptive algorithm is less convenient.

Keywords: artificial neural networks, multilayer perceptron, genetic, adaptive, hybrid algorithm

The article is devoted to the scientific basis for the concept of safe principles of sustainable development in the process of urban planning and selection of investment and construction projects of development of urban territories. The author on the basis of the analysis of legislation and normative and legal basis discussed approaches to the characterization of the safe development of the urban environment, studied the principles of sustainable development-based approach to the application of the concept of acceptable and reasonable risk in the planning of urban development of urban territories, identifies areas and the boundaries of their realization.

Keywords: concept of security, urban planning, integrated development, urban territories, the risk of

The characteristic of ammonium electrolytes for electrodeposition of an alloy zinc-nickel is given. Corrosion properties, microhardness and phase structure of coverings by an alloy zinc-nickel are studied.

Keywords: electrodeposition, properties of coverings an alloy zinc-nickel, the electrolytes containing chloride of ammonium

At the present stage, energy-efficient construction is one of the important issues included in the legislation in most countries. One of the promising ways of lowering thermal energy demand for heating is to reduce heat losses with air exchange in buildings, which accounts for over 60% of heat loss.
Civilizational development of the society is only possible with the decrease in specific energy consumption and economical use of heat. The article discusses the main methods to improve energy performance of buildings under construction and operation. It also addressed issues of investment in energy efficiency projects. The article substantiates the effectiveness of the combined extract and input ventilation with heat recovery of vented emissions in Rostov- on-Don.  

Keywords: energy conservation, improvement of the energy efficiency, efficiency assessment, investment, energy-saving measures.

In article efficiency and accuracy медов measurements of noise characteristics of the equipment and cars are considered.

Keywords: The risk, injuring factors, labour safety

The article describes the methods of forming the program of technical and economic feasibility of reconstruction. The program is based on the technical and economic calculations which justify the need for its development. It is important to take into account the technical and economic indices which provide a minimal amount of construction works. During the development of technical and economic parameters, it is necessary to take into account the organization of construction, the terms of energy saving, heating, water supply, drainage and industrial waste water, human resources, the environment, the effectiveness of capital investments. All questions are considered for the perspective of the development of science and technology.

Keywords: site renovation, technical-and-economic indexes

  Technology of fabricating unheated gas sensors based on polyacrylonitrile (PAN) using different temperature and time modes of a two stages IR-pyrolyze is developed for the remote control of the human condition. Gas-sensing elements based on PAN films and cobalt- and copper-containing PAN films are fabricated. Gas sensitive characteristics of the gained samples to CO, Cl2 and CHCl3 in atmospheric conditions are determined. We have found that gas-sensitivity of the samples depends on the composition of the original film-forming solution and on the process parameters of fabricating the film material. Moreover the samples show sensitivity and selectivity at room temperature. The benefits of this study is that films based on PAN and metal-PAN are the most promising material for electronic engineering including gas sensors for the remote monitoring of the human condition.

Keywords: Nanocomposite materials, gas-sensing layer, metal-containing organic polymers, IR- pyrolyze

Results of research the ties of refrectory oxide, which form in the course of filling with stainless steels, and specific point defects impairing casts of stainless steel.

Keywords: quartz mould, chromium steel, oxides, chemical analysis, physicochemical interaction

  Polypyrrole is a perspective material for gas sensors. Property of polymeric chains can vary largely depending on their packing. Power characteristics are studied. Features of a structure and power tetramers thiophenes with methyl, ethyl, propyl substitutions in position 3 pyrroles a cycle are investigated. The most perspective and stable tetramers are revealed from the thermodynamic point. The estimation of laws of formation of a polymeric chain is spent.  Influence of the assistant on stability tetramers is considered.

Keywords: Polypyrrole, quantum-chemical research, influence of alkyl substituents, tetramer, cycle, polymeric chain, power tetramers

In this article authors give information about problem of fiber-optical communication lines thermal-electric degradation and its consequences and study main reasons and factors which have an influence upon the degree of thermal-electric degradation. Possible and the most promising research ways are examined in this subject area; they let not only study this subject of  fiber-optical communication lines thermal-electric degradation in detail but to solve this problem in whole.

Keywords: electromagnetic field, thermal-electric degradation, fiber-optical communication lines, FOC-cored static wire, kevlar, electrified railway