The article discusses the features of numerical modeling of the limits of fire resistance of structures under the influence of standard and hydrocarbon temperature regimes. After carrying out the assessment using the proportionality coefficient, it is necessary to carry out a verification calculation of the structure tested under the standard temperature regime of the fire, and if the results obtained coincide, the calculation of the structure under the hydrocarbon regime.

Keywords: fire resistance of concrete building structures, standard fire temperature regime, hydrocarbon fire regime, fire resistance

The essence of the proposed is the arrangement of the frame from the channel around the coating beam. At the same time, the frame elements can be subjected to controlled effects, in the form of overvoltage in them, which is realized by specially installed traction brackets. The study of the proposed structural and technological solution, implemented by a channel frame, was carried out using digital technologies based on numerical modeling. In the proposed calculation model, the beam reinforcement area was changed due to the introduction of a reinforcement frame. In the Etabs software package, using the finite element method, transverse forces and moments were calculated in the newly formed system - a beam plus a channel frame. The paper considers the issue of the influence of the frame on the transverse force in the beam. Using the technology of processing large arrays of numbers, a mathematical model of the process was obtained when the beam was reinforced with a channel frame. A consistent analysis of the mathematical model was carried out, which allowed to state the correctness of the decision and assign the design dimensions of the device and its technological parameters.

Keywords: reinforced concrete beam, reinforcement, channel, reinforcement, shear force, load, numerical method, mathematical modeling, numerical modeling, mathematical model, Etabs software package

This article discusses the urban planning concept of camping sites as objects of roadside service. The functional structure of the camping is considered. The analysis of the transport infrastructure and tourist flow of the Arkhyz district is carried out. The scientific experience in the organization of the camping system is considered. Based on the analysis done, a model of the formation of the functional structure of the camping system has been compiled.

Keywords: camping, transport infrastructure, roadside service facilities, auto tourism, tourism, camping industry, camping system

As part of the optimization of the design solution, studies of a cylindrical rod roof with increased rigidity of the support ribs and taking into account the reinforcement of the system with puffs were carried out. The required distance between the tension elements along the length of the structure is determined and the dimensions and shape of the section of the lower ribs are proposed. An optimality criterion with control parameters has been developed and three standard sizes of rods for the greatest efforts have been taken into account. Internal force factors and node movements with and without reinforcement are obtained. A positive redistribution of efforts on the surface and a decrease in the deformability of the roof were revealed. The dependence of the main geometric parameters on the mass is established.

Keywords: cylindrical rod roof, stiffness of support ribs, reinforcement by tightenings, optimization, forces, displacements, mass

The article provides a brief analysis of the processes that occur when starting an electric motor. Mathematical relations modeling the process of starting a direct current motor are presented. Graphical dependences allowing to determine parameters of a thermistor providing an optimum start-up of a direct current machine have been obtained.

Keywords: starting current, thermistor, starting rheostat, thermal characteristic, DC motor, boundary conditions, torque resistance, idealized rheostat, heat loss, economical starting

The paper proposes and calculates a scheme of a two-stage gas turbine plant using carbon dioxide as a working fluid in the second stage and using heating of the CO2 circuit, as well as heating water sent for heating. As a result, the following were calculated: for the first stage turbine: parameters of fuel combustion products; air compressor parameters; fuel compressor parameters; combustion chamber parameters for a real Brayton cycle; Efficiency of the first stage turbine; for the second stage of the gas turbine: a schematic diagram was drawn up using liquid CO2 as a working fluid; calculation of CO2 parameters at key points of the Brayton cycle; the efficiency of the turbine of the second stage is calculated.

Keywords: energy efficiency, gas turbine plant, carbon dioxide, pressure, pressure ratio, combustion chamber, recuperator

Based on the beginning of the least work, theoretical dependencies were obtained to determine the internal forces in the elements of the combined trussed system. The analysis of the calculation results of a trussed beam with four posts was carried out and the physical side of the phenomenon of bending during the interaction of the main structure of the trussed beam with elements of a multi-post truss was revealed.

Keywords: truss beam, combined system, multi-column truss, relative eccentricity, potential energy

Mobile applications are widely used by many people in everyday tasks. Every year there is an increasing need for more functional, convenient and reliable software tools that can provide fast and safe work in various fields. But to develop such an application, it is necessary to use an architecture that meets all the requirements. In this paper, we will talk about the use of components from Android Architecture Components developed by Google, which allow you to implement some design patterns taking into account the features of the Android operating system. The article will provide a list of the most used components, as well as a brief reference on their functionality. The work of one of the components with the basic elements of the Android operating system is considered. The interaction of components is also schematically shown by the example of the implementation of one of the design patterns.

Keywords: application architecture, Android Architecture Components, application, android

The article gives a brief analysis of thermal processes occurring during the start-up of an electric motor. Mathematical relations modeling the distribution of thermal energy in the thermistor during the process of starting the DC motor are presented. Graphic dependences are presented, which allow to make arrangement of thermoresistors for the starting rheostat and to determine parameters of the starting rheostat obtained in this way. Application of the starting rheostat made on the basis of thermistors, provide an optimal starting of a DC motor.

Keywords: control gears, thermistor, starting rheostat, DC motor, temperature, dynamic characteristic, form of starting current

Currently, special attention is paid to artificial intelligence systems in transport. One of the actual directions is the development of self-driving car. However, there is also an intermediate approach. When the control is not fully automatic and automated. In such systems a human plays an important role, but the system, analyzing data from the environment, allows to form various kinds of recommendations. Moreover, such systems allow to work on the warning in some situations. In particular, some driver monitoring systems allow to detect the fact of smoking while driving, turning your eyes away from the road. In this article, special attention is paid to the system of analysis of the driver's eyes. First of all, the results of such analysis can be used to determine the fact of falling asleep. However, by analyzing, the frequency of blinks, it is possible to predict sleep. Nevertheless, computing power is needed to build such a system. In this work, the performance is achieved by using Haar cascades and the Viola-Jones method in eye detection. The eyes detected in the video are images of a much smaller size compared to the whole frame of the video sequence, due to which high performance is achieved in their processing by the convolutional network in the next step. Structurally, the system consists of two neural networks operating in parallel for the left and right eyes. The obtained values of completeness are about 90%.

Keywords: computer vision, artificial intelligence, security system, face detector, deep learning, target skipping, proportion of correct recognition, driver monitoring, eye recognition, Viola-Jones method, Haar cascades, optimization

The article is devoted to a comparative analysis of the architectural features of the sacred complexes of Galgai-che of the XIII-XIV centuries. on the territory of Ingushetia. In the context of the natural-spatial arrangement, the manifestations of religious contamination in the spatial organization and external forms of "folk" temples are considered. The originality of the options for "folk" temple building was revealed. The peculiarities of temples characteristic of late Nestorianism were revealed. This method is used for the first time to study the sacred complexes of Ingushetia. The scientific novelty of the article is due to the fact that a comprehensive study of planning, space-dimensional solutions and construction equipment of churches allows us to confirm their dating and attribution, to establish the chronological proximity of the monuments.

Keywords: Folk temple building, architecture of the Middle Ages, traditional architecture of the Vainakhs

The article discusses the production and use of environmentally friendly fuel - pellets. A review of the designs of mobile pellet production plants was carried out, the advantages and disadvantages of these designs were identified. Potential consumers of pellets and equipment (heating boilers for which pellets are the fuel) are considered. A mobile complex for the production of pellets on the chassis of the MSN-10-004-03 . The technology of pellet production using a mobile mobile installation is described.

Keywords: pellets, mobile plant, design, biofuels, production technology

The cause of failures of building structures is design errors (18 - 51%). For metal structures the most frequent (22 - 44%) reason of failures is the loss of stability of its elements. At the conceptual design stage, it is important to have simple ways of determining design lengths of compressed structural members. A single-span two-storey hinge supported frame is considered. The magnitude of the critical load on the frame depends on the distribution of concentrated forces over the frame nodes. Doing a series of calculations, we find that: the minimum value of critical load is obtained when the force F of the left post of the second floor is loaded; maximum value is obtained by loading the first floor props with the same forces F/2. For practically important cases the parameters determining the critical load differ from one another by no more than 5% . The notion of ro-similar frames as frames with the same ratio of linear rigidity of a transom and a column is introduced. It is shown that the parameter, determining the critical load on the frame, is the same for ro-similar frames. For almost important cases, approximate formulas have been obtained, allowing to determine the critical load parameter and the calculated lengths of compressed rods with an error of not more than 5%.

Keywords: flat frame, loss of stability, critical force, design lengths, stability equation, ro-similar frames, approximation, least squares method.

The use of information technologies in the tasks of medical rehabilitation is an effective method, but it is often complicated by the problems of using standard control devices and input into the computer by people with motor impairments. The developed hardware and software complex allows one to obtain data on the orientation of the joint in space, "turning" them into the movement of the mouse pointer, allowing one to interact with computer software, instead of the mouse manipulator. By changing the sensitivity of the sensors, the process of rehabilitation of patients is corrected. The used component base of the complex being developed and the technologies used make it possible to form a significantly lower cost, the possibility of using it outside the clinic, working without the help of specialists, application in control actions with computer software not only for rehabilitation but also for people with disabilities. The paper defines the tasks and functions that are solved by the hardware and software complex. In the 3D editor, the body frame and the internal arrangement of components are modeled, hardware and software tools are selected to ensure the implementation of the project. The functional scheme of the "Limbtracker" device has been developed. During the execution of the project, the following was implemented: reading data from sensors and writing them to a text file, filtering data by the Kalman algorithm, calibration of the device.

Keywords: hardware and software complex, home rehabilitation, neurorehabilitation, STM32, microcontroller, device design, USB-hid

The article deals with the distribution of fine dust in the atmospheric air of roadside areas of cities with a linear configuration, factors affecting its concentration in the roadside area.

Keywords: fine dust, roadside areas, road transport, wind speed, meteorological parameters