The present cultivators of the soil have a negligible width and depth of loosening is mainly up to 0.6 m. When the number of racks is significantly reduced completeness of loosening, increases the mass of the gun and increase traction resistance. In addition, the possibility of loosening soil to a greater depth is limited. There are rippers with surround deformers. They are inclined relative to each other vertical knife rack, rigidly connected to each other in the lower part with shingles made V-shaped with the apex directed upwards. In this architecture, the system deformers there is a need for analysis to determine the tensile strength in a first approximation: as much as possible to lengthen the elements of the blade without loss of strength and significant changes in their geometric characteristics of the flat cross-section. Reviewed the formulation of the calculation of the strength of the isotropic sloping steel plates of finite dimensions, a polygonal profile with rigidly clamped opposite edges of constant cross section, equal stiffness, as an element of deformers of the chisel type surround. Shows the justification of the selected geometric characteristics of the broken plate. Presents a preliminary finite element modeling using the software - computing complex Structure CAD (SCAD), considering static and dynamic loads. In the formulation of the numerical calculation primarily pursued the goal of establishing the adequacy of a solid model of the stress – strain state of a polygonal sloping steel plates of constant cross section with rigid pinched at the edges. It is established that the threat is a reduction in the actual thickness of the plate more than 1/3 of the project, which leads to failure of the individual piece of details. With little loss of thickness plots of displacements is characteristic reflects a valid value.

Keywords: The calculation of the strength, deep loosing, system of deformers, stress, strain, bending, a broken plate, clamped edges, geometric characteristics

The action of the microwave field is used for drying, pretreatment and disinfection of grain. In all these processes, it is very important to control the change in the parameters of the grain layer. The use of sensors for direct measurement of temperature and humidity of grain and air is difficult. The microwave field leads to errors in the measurements, and therefore the possibility of an indirect control of these quantities is considered. For the indirect measurement of these quantities, a computer model has been developed. To develop a computer model, a system of equations was used that describes the exchange of heat and moisture in the grain layer under the action of the microwave field and convection. Some equations in the mathematical model are partial differential equations. To develop a computer model, these equations were presented in an operator form. The article shows how this procedure was used to transform the equation showing the relationship between the grain temperature and the microwave field, air temperature and moisture content of the grain. This approach allowed the use of computer software for analysis and syn-thesis of control systems. In this case the Simulink software package was used. Simulink - a model for the exchange of heat and moisture in a thick layer of grain, when exposed to microwave and air, was created using elementary dynamic elements of automation. When developing a computer model, a step-by-step method is implemented. The essence of the method is that the grain layer is divided into elementary layers. The output parameters of one grain layer become input parameters for the next layer. A complete model for the exchange of heat and moisture in a layer of grain consists of models of elementary layers. The results of modeling the change in the temperature of grain heating confirmed the adequacy of the model. The use of this model in the control systems of drying and processing of grain will increase the accuracy of control and regulation.

Keywords: drying grain, grain layer, grain moisture, grain temperature, drying agent, microwave action, heat and moisture exchange, modeling

The number of programs for modeling and design of buildings is great and continuous expansion of industry of creation objects cannot be stopped by high technologies. The most part of Russia's origin companies pay attention to foreign products despite great presence of domestic segment on the market. In the article will be considered the domestic software package Renga and also underlined his own advantages over existing analogues.

Keywords: Renga, Renga Architecture, Renga Structure, BIM, design, modeling, building, program

The results of the laboratory studies to determine the suitability of clay raw materials Sukho-Chaltyrskoe field for production of ceramic brick by the method of plastic molding. It is established that the introduction of the composition of the batch burnt mine rocks as emaciated additives and ash as a fuel-containing, as well as in the processing of faces with a special solution, it is possible to obtain ceramic samples that meet the requirements of GOST.

Keywords: clay raw materials, plastic molding, ceramic brick, emaciated additive, frost resistance

The technology of the new generation is an injection method of polymer waterproofing. As for polymeric compositions for injection are used polyurethane compositions; materials based on epoxy tar; micro cement; acrylate gels. Acrylate gels can provide the necessary reliable, highly elastic barrier from water pressure. Reducing the cost of injection waterproofing is possible through the use of acrylate waste paintwork materials (PWM). The results of studies on the use of acrylate wastes (PWM) as a water-repellent additive to concrete, allow us to recommend identical wastes as materials for volumetric water-repellent treatment of building structures in order to reduce the cost of water resistance by injection.

Keywords: injectable waterproofing for buildings and constructions, waterproofing materials, paintwork materials, polymer wastes

The peculiarities of the activity of mobile car repair shops are considered. Mathematical models for determining indicators, taking into account the randomness of the receipt of requirements for maintenance and the duration of the services themselves, are proposed.

Keywords: mobile car repair shop, probability, criteria, complex indicator, efficiency

This article determines the approach to the implementation of the role model in the implementation of 1C-Bitrix, shows the key approaches to implementation and their impact on productivity, allowing to determine the degree of influence of the role model and choose the most appropriate approach regarding the implementation of 1C-Bitrix. The urgency of research of influence of role model on productivity is grounded. The key factors of the construction of the role model affecting speed and productivity are considered. The criteria for measuring the performance of the role model are presented. The results of measurements of the influence of the role model on productivity in accordance with certain criteria are described. The result of the measurements is the analysis of the influence of the role model and the factors of its construction on the system performance on 1C-Bitrix.

Keywords: web systems, 1C-Bitrix, system performance, role model, distributed web systems, 1C-Bitrix system, web performance, role model impact, role model performance, role model implementation

The article presents the analysis and safety assessment of hydraulic structures in the upper-Balkar small hydroelectric power plant. This is done for a project for the suspension and preservation of hydraulic structures Verhnebakansky of a small hydropower plant on the river Cherek in Kabardino Balkar-Balkar Republic. A detailed analysis of causes and factors of external impact of natural and man-made disasters on structures. Determined that most dangerous mountain of the construction site are the physical and geological processes. Established that the level of safety of hydraulic structures Verhnebakansky Small hydropower plant at the time of the survey can be assessed as normal. The values of all controlled parameters do not exceed the established safety criteria. Developed and implemented design solutions for the period of the suspension of construction and the stage of preservation provide strength, stability and safety of structures. Object safe for people and the environment.

Keywords: hydraulic structure, small hydro power plant, free-flow diversion tunnel, a sump, diversion tray, physico-geological processes, risk assessment, hazard ratio, possible crash damage, quantification of risk, negligible risk

The article considers the possibility of creating distributed transmission and accounting networks for energy resources. The experience of different countries in creating smart networks was also analyzed and the effectiveness of such systems was evaluated. "Intelligent" systems allow you to distribute energy more efficiently for end users. In addition, "smart" systems allow you to track leaks, accidents, and theft of electricity. The problems associated with the deployment of smart networks are considered. The main features and problems of introduction of accounting systems of housing and communal services in Russia are given. The system of state information system of housing and communal services is considered.

Keywords: Housing and communal services,distributed network,"Smart" systems, Information system, energy resources

The article describes the relevance of the design of tall buildings. A characteristic feature of high-rise buildings is preferential perception of horizontal loads under the impact of the wind flow. Therefore, the stiffness stems represent the most characteristic for high-rise construction internal vertical support structure.

Keywords: high-rise building, strength, reliability, a horizontal load, the core stiffness, trunk stiffness, the layout structure, column, frame, diaphragm stiffness

The frequency divider for 32, operating in a range of frequencies 8-18 GHz is considered. The specifics of the schematic diagram is shown. The design and element base is described in short. The model is made and its experimental research is carried out. The technique and the block diagram of the experiment is described. Level of harmonics of an output signal is measured. For decrease of level of harmonics of the useful signal the low-pass filter of type SALF-580 is used. Presence of a parasitic output signal in the absence of an input signal is revelead.

Keywords: frequency divider, microcircuit, experiment, amplitude-frequency characteristic, low-pass filter

Justification and results of pilot studies of influence of parameters of a matrix of fixing of the special soft polymeric edges forming the additional locally concentrated rigidity of external material of the warmed clothes of a special purpose is presented in article. Technical characteristics and standard restrictions for the textile material considered at the heart of the projected product taking into account the requirement of GOST and operational criteria are given. Data on modern ways of increase in resistance of an external cover of clothes to the deforming influences for the purpose of preservation of internal volume and, as a result, necessary thermal insulation of clothes are submitted. On the basis of established experimentally dependences of rigidity of the modified material on width and thickness of polymeric channels the way identification of extreme density of filling of polymers of the internal surface of integumentary material with it taking into account the requirement of hygienic and operational character is offered.

Keywords: heat-shielding clothes, design, properties of textile materials, rigidity of materials for clothes, a formoustoychivost

In the current socio-economic reality, the main task of design, road organizations is the high-quality reproduction of road structures, the development of the road network, and also to maintain the transport-operational condition of the highway. In this paper, examples and models are provided that allow an estimation of the probability of destruction of individual sections of a road structure, as well as the dependence of the reliability of a road structure on the actual coefficient.

Keywords: road wear, service life, defect, crack, analysis, actual condition, deflection, coefficient of strength, deformation

The article is developed information model of urban security, which is necessary to carry out technical inspection of apartment houses for the formation of the accessible environment during the reconstruction of urban development

Keywords: accessible environment, people with limited mobility, universal design, reasonable accommodation, information model, spatial planning, technical examination, reconstruction, structural-functional areas

There was a need for geotechnical monitoring during construction of underground facilities. The organization of monitoring control tensile forces in the concrete anchors. Comparison of experimental and calculated data, which revealed that the deviation does not exceed 19%. When using anchor embedment length limited in a large range of conditions in a rod anchor having critical internal forces. To increase the efficiency of anchors in their construction can be used in flexible elements of the anchor bolt assembly.

Keywords: underground construction, monitoring, anchor well, tensile forces, the bearing capacity, the compliance node