A constructive solution of the walls of wooden houses from round logs or a profiled beam, which is installed vertically (wooden element) is considered. It is proposed to arrange two longitudinal milled grooves of a rectangular shape located in the diametral plane of the section of the log for the installation of sheet plywood keys, which makes it possible to include in the joint work adjacent contiguous elements when working on bending from the plane of the wall. The variant of the strapping device, it is proposed to use metal rolling profiles of Channel and I-sections, connected with metal tube elements (box section) mounted in the corners of the frame.

Keywords: round log, profiled beam, sheet plywood keys, tubular section elements

The evolution of organizational and technological methods of construction of public buildings during the Russian middle Ages from aesthetic, economic and socio-political aspects is studied. This paper examines the impact of the economic component of the state on the possibility of construction of the building, its carrying capacity. The a priori necessity of construction of religious building in the Middle ages even in the conditions of permanent economic crisis is proved

Keywords: organization of construction; construction economics, history of architecture, history of the construction industry

The problem of improving the efficiency of construction through the use of advanced methods of labor organization is studied. Proposed improvement works by reducing, modernization of production

Keywords: organization of construction; operational reliability of buildings; efficiency of labor organization

In the paper, on the basis of the equation of motion of an incompressible lubricant having the micro-polar properties for the case of a ""thin layer"", the equation of continuity, Darcy and the formula for the energy dissipation rate for determining the function Ф (θ), caused by the molten surface of the bearing bush covered with a low-melting metallic melt of a carrier asymptotic solution by the thermal parameter K. Using a self-similar solution for the zeroth approximation, i.e. without taking into account the melt of the low-melting metallic melt, and for the first approximation, taking into account the low-melting metallic melt, the velocity and pressure fields in the lubricating and porous layers are determined, and the basic performance characteristics of the radial slide bearing are determined. The characteristic permeability of the porous layer and the melt of the surface of the bearing bush, coated with a low-melting metallic melt, on the load capacity and frictional force are estimated.

Keywords: low-melting metallic melt, porous layer permeability, lubricant with micro-polar properties, sliding bearing

Тhe article deals with the malfunctions of the vehicle's brake system, resulting in uneven wear of the brake pads. Illustrations of damaged pads are given. Recommendations for troubleshooting are given.

Keywords: car, brake system, brake shoe, wear pads, malfunction

In the article questions of diagnosing of a technical condition of antiblocking system (ABS) of brakes of the car are considered. The main types of faults and the causes of their occurrence are outlined. Recommendations are given to drivers for the prevention of damages or failures of ABS

Keywords: car, anti-lock braking system, diagnostics, stand, malfunction, failure

The progressive destruction has enormous economic and social consequences. The problem of finding the optimal way to protect high-rise buildings from the development of a chain of avalanche-like destruction process has become of great importance due to the increase in the height of such buildings. In this work the method of protection of buildings from progressive destruction at which the technology of amplification by means of weights and built-in power frameworks is used is investigated.

Keywords: Progressive destruction, protection of multi-storey buildings, combined reinforcement, strands, built-in power frames

Short data on efficiency of a fibrobeton on the basis of heavy quartz sand are provided in work. Taking into account existence of huge reserves of natural porous fillers (the tufa, pumice, pummitsit, etc.) in various regions of Russia and also the fillers received on the basis of industry waste the relevance of a research of a stalefibrobeton with easily concrete matrixes is proved. Experimental selection of optimum composition of concrete on the basis of tuff filler of the Kamensk field of Kabardino-Balkar Republic regarding his use as a matrix of a stalefibrotufobeton (SFTB) is executed . The picked-up structure has been used for creation of skilled combined and monolithic samples of beams which should be tested. During formation of beams control samples of a stalefibrotufobeton have been selected and tested. Results of tests of control samples for compression, stretching and a bend demonstrate that fiber reinforcing exerts significant positive effect on strength and deformativny properties of a tufobeton. Data of experimental research confirm a possibility of using tufobeton in the stalefibrobetonnykh designs.

Keywords: Stalefibrotufobeton, steel fiber, matrix, volume percent of fiber reinforcing, stretching, compression, bend, dynamic influences, zone placement

The task of this work is a survey of passenger correspondence, a traffic intensity survey ,a passenger traffic survey of the road net on the example of Sochi. Used methods: passenger correspondence polling by questionnaire, statistical analysis for the array of correspondence processing, observation, registration and analysis of traffic and passenger intensity.

Keywords: passenger correspondence, traffic, public transport, passenger traffic

The article is devoted to the reduction of steel consumption in the compressed zone of reinforced concrete elements. Special attention is paid to the combined prestressing, in which the armature of the stretched zone is subjected to prestressing, and compressed – prestressing. The combined prestressing allows to reduce the steel consumption, and also to increase the performance of many technical characteristics by increasing the limit stresses in the high-strength reinforcement of the compressed and stretched zones

Keywords: the combined prestressing, compressed area, consumption of steel compressed fittings

A review of the serial microwave detectors of AEROFLEX company was conducted. Parameters of 116 detector models are considered. The features of AEROFLEX products are noted, including wide frequency range, high sensitivity, harsh operating conditions, a variety of design, including coaxial and strip type.

Keywords: detector, voltage sensitivity, tangential sensitivity, standing wave ratio, non-uniformity of the transfer characteristic, offset, overload protection

The article discusses the development of a mathematical model in the deterministic form of recording the main dependences that determine the process of vaporization in a steam power plant to produce heat and electricity when used as a source of biofuel energy. Theoretically, the parameters of the working process of the installation were calculated; thermal efficiency of the turbine; heat useful used in the boiler unit; the efficiency of the boiler; the percentage of heat loss with exhaust gases; the estimated hourly consumption of solid biofuel; the annual amount of heat obtained by burning the mass of crop residues; the theoretical combustion temperature of crop residues; the actual steam velocity in the Laval nozzle; the heat loss in the nozzle, etc.in the course of calculations with the help of a multi-factor experiment, the parameters and the shape of the turbine blade used in the installation were obtained. Using the presented mathematical model given in the article and the data of the Federal state statistics service, we obtain the numerical values of the working process of the installation working on biofuel. For convenience, all the summary theoretical data of the numerical values of the basic theoretical dependences of the mathematical model of the working process of the layout of the steam power plant for heat and electricity was included in the table. Thus, theoretical studies show the possibility of producing electricity of the required quality using straw to produce high-pressure steam.

Keywords: mathematical model the working process of the pressure volume, a steam turbine,producing heat and electric energy, biofuels

The article presents the results of simulation of the microstrip microwave structure of the ring configuration, which, by analogy with the fiber-optic prototype, embodies the principle of Fano resonance formation. This type of resonance is characterized by the asymmetry of the shape and has a narrower resonance than the classical Gaussian and Lorentzian forms.

Keywords: Ring resonator, Bragg reflection, Fano resonance, phase shift

In this paper, we study the frequency dependence of the inductor with a ferromagnetic core in the sound frequency range. Based on the measurements made, a replacement circuit for the coil is constructed, taking into account the active losses due to magnetic hysteresis, as well as the capacitive component of the current appearing at higher frequencies. The method of determining the parameters of the substitution scheme is given in the article, which, due to the complexity of the mathematical model, was determined by statistical averaging of the solutions of systems of nonlinear equations. Conclusions are made about the practical application of this substitution scheme in electronic devices.

Keywords: substitution scheme induction coil, frequency dependence of the impedance of the induction coil, active losses in the core

This article provides information about the state of the housing stock of the Russian Federation, provides statistical evidence, and the reasons for the current state of residential buildings and structures. The influence of modernization on the preservation and restoration of the housing stock of the Russian Federation is indicated, its expediency and main types of works are given, the results of modernization are presented

Keywords: housing stock, housing problems, modernization, operational parameter, the desirability of modernization, depreciation of the building, main types of works, replacement of equipment, add-in floors, changing the geometry of the premises